Other
- Protects high risk areas from rock chips, wear & scratches
- Designed around road and gravel bike geometry
- Fits all makes, models and sizes
- Designed for maximum coverage with minimal trimming
- Frame coverage ~60%. Includes toptube, full downtube, 4 stays, seat tube and extra pieces
- Easy install and high durability
- Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth
- Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day
- A low surface energy means that less dirt sticks to your bike and is easier to clean
- 10 year warranty against discoloration and cracking
- Available in either matte or gloss finish to match factory paint and is nearly invisible once installed
$1.00
Famed for his ability to direct an amazing event with or without snow, Larry hits the trails of Borderland State Park in Easton, MA every year on Super Bowl Sunday with our friends at Rock Hard Racing.
$6.99
Cannondale Headshok Adaptor for the SKS Shockboard Fender
$8.95
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
$8.99
Replacement SKS Rubber Straps for RacebladePro and S-Board
$9.49
The Lizard Skins Patch Kits are made with high performance adhesive and will protect your frame from nicks and scratches.
All patch kits come with 2 large, 4 medium and 2 small patches.
- 14 mils thick for premium durability
- UV resistant – won’t fade or discolor
$9.90
The Elegance aluminum fixed-length kickstand is available in three lengths for different wheel sizes.
$9.99 - $12.00
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes!
- 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
- For bikes without factory mounting plate (includes top plate and bolt)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
$9.99 - $10.99
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA.
- For bikes with a factory mounting plate (includes bolt)
- 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
$9.99
This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA.
- 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
$10.99 - $12.99
Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.
$10.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive.
- 32mm wide x 222mm long
- 3 extenders included for desired protection
$10.99
Keep your handlebar organized and your devices secure with the SpaceMount Clamp from Minoura.
- Single action multipurpose clamp fits almost anywhere on the bike
- Small: red logo, 22mm–29mm clamp diameter
- Medium: black logo, 28mm–35mm clamp diameter
- Alloy body and stainless steel lever
- Clamp body has one (1) M5 thread hole in center
$11.50
Light-duty zip tie
- 200mm length x 2.5mm
- Bag of 100
$12.00
- Proofide is the only substance that should be used to care for all Brooks Leather Saddles
- A new saddle should be treated with Brooks Proofide leather dressing to help assist the breaking-in process
- Proofide keeps the leather supple as it is specially formulated from natural ingredients to condition, preserve and shower proof the saddle
$12.00
Vinyl adhesive decal, perfect for tool boards, vehicles and trailers. Available in black or white.
Dimensions: 36 x 4.5-inches
$12.99
- Designed to fit most lightweight, midweight, and cruiser bicycles
- Fits frames with welded-on mounting plates
- Made in the U.S.A.
$13.99
This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.
$14.99
You asked for it. This Fork Protector is designed to help prevent scratches from happening to your stanchions. Whether it's from rocks, wear from the adventures of travel, or bug guts during roof rack transportation, this will help protect your fork.
- Fits Fork Stanchion size 32-36mm
- Fits forks up to 180mm in travel
- Weight: 31 grams (pair)
$15.00
The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way.
- Holds one standard bottle cage
- Accommodates two threaded CO2 cartridges, up to 25g
- Can be installed directly to bottle cage mounts on frame
- Bottle cage and cartridges sold separately
$17.95
Made of aluminum and embossed with the “Bicycle Tools” label.
Dimensions: 26.5 x 6.5-inches
$17.95
Show your Park Tool pride with this full-color, embossed metal logo shop sign.
• Dimensions: 508 x 299 mm (20" x 11.75")
$19.99
- Easy to apply: Simply peel off and install
- Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and damage to your cranks
- Durable, weatherproof 3M adhesive
- 2-piece pack is designed to fit most cranks
$19.99
Designed for bartenders, homebrewers, and the kind folks who pour our delicious cold-brew coffee, the Problem Solvers Pedal to Tap Handle Adapter allows thirsty cycling enthusiasts to top their favorite tap handle with the bicycle pedal of their choice.
- Works with standard 3/8" tap handles and 9/16" pedal spindles
- Two configurations, both labeled with "L" or "R", for compatibility with left and right-hand-threaded pedals
- Aluminum construction
- 20 TPI
Page 1 of 4
Next page